Servo Stabilizer

PURPOSE:

The Basic Purpose Of Intelligent Servo Stabilizer Is To Maintain Desired Voltage And To Reduce The Breakdown Of Electrical Equipment Due To Low/High Supply Voltage.

Power Saving And P.F. Improvement Will Be Added Advantage To The System.

Most Of The Industrial Applications Have Electrical Motors As A Load. Electric Motors Draw Considerably High Current At Low Voltages And Higher Losses At High voltage. So Voltage Control Is Very Essential.

Ultra Isolation Transformer Is Given With Panel To Avoid The Failure Of Electrical Components Due To Switching Of Inductive, Capacitive And Resistive Load. UIT Reduces Switching Noise and Harmonic Noise Normally Passed From Source To Load Or From Load To Source.


SALIENT FEATURES SMART FEATURES TECHNICAL SPECIFICATIONS
# Control By Specially Designed Fully Solid State Controller

# Input Protection Through MCB/MCCB

# Under/Over Voltage & Over Current Tripping.

# Single Phasing, Phase Reversal and Unbalanced Supply Protection

# Enclosure With Caster Wheels For Easy Portability.

# Visual Alarm On LCD Display For All Faults Like LV, HV, High Current Etc.

# User Friendly Parameter Setting Through Keypad

# Automatic Cutoff On No Load

# Provision For Audio Alarm (Optional)

# Automatic Start/Stop Of Panel Through RTC (Optional)

# RS232/ RS485 interface (Optional)

# Fault History Log (Optional)

# CAPACITY :10 to 100 KVA (Air Cooled)

# TYPE OF CONNECTION :Star – Star, Star – Delta

# INPUT VOLTAGE :300 VAC – 480VAC L – L

# OUT PUT VOLTAGE :380 VAC – 415VAC L – L

: 220 VAC – 240VAC L – N

# OUTPUT VOLT ADJUSTMENT :+/- 20 Volts

# EFFICIENCY :Better than 96 %

# RESPONSE TIME :100 ms

# RATE OF CORRECTION :20 – 35 Volts / Sec